spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 1 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148 t-1 3/4 (5mm) solid state lamp attention observe precautions for handling electrostatic discharge sensitive devices part number: WP7113ZGC green features z low power consumption. z popular t-1 3/4 diameter package. z general purpose leads. z reliable and rugged. z long life - solid state reliability. z available on tape and reel. z rohs compliant. description the green source color devices are made with alingan on sapphire light emitting diode. static electricity and surge damage the leds. it is recommended to use a wrist band or anti-electrostatic glove when handling the leds. all devices, equipment and machinery must be electrically grounded. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. 3. lead spacing is measured where the leads emerge from the package. 4. specifications are subject to change without notice.
spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 2 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 the optical centerline value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. 3. 5mm below package base. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 WP7113ZGC green (alingan) water clear 3800 6500 20 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength green 515 nm i f =20ma d [1] dominant wavelength green 525 nm i f =20ma ? 1/2 spectral line half-width green 30 nm i f =20ma c capacitance green 45 pf v f =0v;f=1mhz v f [2] forward voltage green 3.3 4.1 v i f =20ma i r reverse current green 10 ua v r = 5v parameter green units power dissipation 102.5 mw dc forward current 25 ma peak forward current [1] 150 ma reverse voltage 5 v operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3 seconds lead solder temperature [3] 260c for 5 seconds
spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 3 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148 green WP7113ZGC
spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 4 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148 packing & label specifications WP7113ZGC
spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 5 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148
spec no: dsaf0944 rev no: v.4 date: may/10/2007 page: 6 of 6 approved: wynec checked: allen liu drawn: y.l.li er p: 1101012148
|
